Renesas TFP-144 用户手册

Section 2 Connection Procedures

2.1

Connecting User System Interface Cable to Expansion I/O board

WARNING

Observe the precautions listed below. Failure to do so

  will result in a FIRE HAZARD and will damage the user
  system and the emulator product or will result in
  PERSONAL INJURY. The USER PROGRAM will be
  LOST.
  1.   Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE CABLE

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are

correctly aligned.

2. The user system interface cable dedicated to the

emulator must be used.

To connect the cable body to the emulator station, follow the instructions below.

1. Make sure the user system and emulator station are turned off.

CAUTION

When connecting or removing the user system interface

  cable, apply force only in the direction suitable for
  connection or removal, while making sure not to bend or
  twist the cable or connectors. Otherwise, the connectors
  will be damaged.

2. Connect the expansion I/O board labeled USER INTERFACE CABLE and the user system

interface cable.