Fujitsu P3NK-4452-01ENZD 用户手册

XG Series User's Guide

Chapter 5 Command Reference

Routing Table Entry Display Commands

5.26 Routing Table Entry Display Commands

This section explains the commands related to routing table.

This section explains the commands related to the IPv4 routing table counter, log, statistics, and status display commands.

Function

Display the routing table information.

Available Model

XG0224 / XG0448 / XG2600

Syntax

show ip route [all]
show ip route connected [all]
show ip route static [all]
show ip route destination <ip_address>/<mask> [all]
show ip route destination <ip_address>/<mask> longer-prefixes [all]

Options

N/A

Display the route information that has been registered on the routing table.

all

Display all route information including route information not registered on the routing 
table.

connected

Display interface route information only.

static

Display static route information only.

destination <ip_address>/<mask>

Display only the route information whose address and mask match the specified ones.
<mask> must be a number of mask bits or a mask value. For the mask value, specify 
successive 1s following the most significant bit (MSB).

destination <ip_address>/<mask> longer-prefixes

Display all route information included in the specified route information.
<mask> must be a number of mask bits or a mask value. For the mask value, specify 
successive 1s following the most significant bit (MSB).

Use Mode

Operation mode (user class/admin class)
Configuration mode (admin class)

Explanation

Display the routing table information that routing manager registered.