Emerson ATCA-9305 用户手册

 Monitor Command 

ATCA-9305 User’s Manual

ATCA-9305 (1.0) => setenv ethport eTSEC1

Optionally, save your settings:

ATCA-9305 (1.0) => saveenv

TFTP the new monitor (binary) image to memory location 0x100000:

ATCA-9305 (1.0) => tftpboot 100000 path_to_file_on_tftp_server

Update the monitor:

ATCA-9305 (1.0) => moninit serial_number 100000

If moninit( ) fails, burn the new monitor to a ROM and follow the recovery steps in the 
“Recovering the Monitor” section.

This section describes the syntax and typographic conventions for the ATCA-9305 monitor 
commands. Subsequent sections in this chapter describe individual commands, which fall 
into the following categories: boot, memory, flash, environment variables, test, and other 
commands.

The monitor uses the following basic command syntax:

<Command> <argument 1> <argument 2> <argument 3>

• The command line accepts three different argument formats: string, numeric, and 

symbolic. All command arguments must be separated by spaces with the exception of 
argument flags, which are described below.

• Monitor commands that expect numeric arguments assume a hexadecimal base.

• All monitor commands are case sensitive.

• Some commands accept flag arguments. A flag argument is a single character that 

begins with a period (.). There is no white space between an argument flag and a 
command. For example, md.b 80000 is a valid monitor command, while md .b 80000 
is not.

• Some commands may be abbreviated by typing only the first few characters that 

uniquely identify the command. For example, you can type h instead of help. However, 
commands cannot be abbreviated when accessing online help. You must type help and 
the full command name.