ASUS P5N64 WS 用户手册

5-48

Chapter 5: Software support

The Marvell

®

 88SE6121 external SATA controller allows you to configure RAID 0 

and RAID 1 sets on the external SATA hard disk drives, or RAID 0, 1, 5 and 10 

set(s) on external port-multiplier devices.

You must set the RAID item in the BIOS Setup before you can create a RAID 

set(s). To do this:

1.  Install two external Serial ATA hard disk drives to the external SATA ports 

labeled 

ESATA1/2.

2.   Boot up your computer, and press <Del> during POST to enter the BIOS 

setup. 

3.  In the 

Advanced menu, go to Onboard Devices Configuration, and enable 

both 

Marvell 6121/eSATA and 6121 Boot ROM.

4.  Set the 

Marvell 6121/eSATA item to [RAID].

5.  Press <F10> to save the changes and exit.

The RAID BIOS setup screens shown in this section are for reference only, and 

may not exactly match the items on your screen.