ASUS DSEB-D16/SAS 用户手册

2-34

Chapter 2: Hardware information

 

(DSEB-D16 model only)

This jumper allows you to select the Serial ATA RAID configuration utility to 

use when you create disk arrays. Both utilities are supported by the 

Intel

®

 6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI 

Software RAID Configuration Utility (default); otherwise, place the jumper 

caps on pins 2-3 to use the Intel

®

 Matrix Storage Manager (IMSM).

®

2 3

1 2

RAID_SEL1

Intel

LSI

(Default)

These jumpers allow you to switch for fan pin selection. The FAN_SEL1 

jumper is for the CPU fans control and FAN_SEL2 is for the other fans control 

including front fans, rear fans and FB-DIMM fans. Set to pins 1-2 for 4-pin 

fans or pins 2-3 for 3-pin fans.

®

FAN_SEL1

FAN_SEL2

1 2

2 3

PWM FAN

(Default)

DC FAN

•  If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed 

may not work.

•  If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan controll will 

not work and the fan you installed will always run at full speed.