AMD SB750 用户手册

 

 
                                                                                                                                                                                                                                                                                                                                                             

 
 
 

setting its jumpers accordingly. Please refer to the documentation of your hard disk for 
the jumper settings. 

 

 

IDE1 

 

 
•  Two hard disks can be connected to each connector.    The first HDD is referred to as the 

“Master” and the second HDD is referred to as the “Slave”. 

•  For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM 

drive on the same IDE channel as a hard disk.    Otherwise, the system performance on this 
channel may drop. 

This connector supports the provided Serial ATA2 IDE hard disk cable to connecting 
the motherboard with serial ATAII hard disk. E-SATA1 is not for SATA harddrive ,it is 
only for connecting to SATAII 1, SATA II 2, SATA3,SATA4,SATA5,SATA6 to let the 
ESATA port work. 

 

SATA3 
SATA1 

E-SATA1 

SATA6 

SATA4

SATA5 

This connector supports the External Serial ATA2 (ESATA) enable the full SATA 
interface speed outside the chassis, up to 3Gb/s. The ESATA port can be enabled only 
when the E-SATA 1 is connected to one of SATA 1~SATA6. 

VGA is the 15-pin D-Subminiature female connector; it is for the display devices, such 
as the CRT monitor, LCD monitor and so on. 

This interface standard designed to maximize the visual quality of digital display 
devices such as flat panel LCD computer displays and digital projectors. 

This point-to-point interface is for audio and video signals designed as a single-cable 
solution for home theater and consumer electronics equipment.