ASUS 1.3 用户手册

40

ASUS Xonar HDAV .3 

Click this button to monitor and loopback recording audio 
to outputs (PC speakers). Therefore, the recording volume 
will influence the monitoring signals from speaker outputs. 
The audio will be mixed into the streams you are playing 
out from your PC and all DSP effects will be applied to the 
source, too. A typical benefit is to apply Dolby Pro-Logic 
IIx 7.-ch spreading for your TV audio, CD, MP3, or stereo 
game console audio from Wii, Xbox, PS2/PS3/PSP, etc. 
To apply Dolby Virtual Speaker is suitable for two-speaker 
environment.

NOTE: When the monitoring function is enabled, audio 

output from HDMI output is disabled.

This shows the source name for each volume control slider, 
including:

S/PDIF-In: S/PDIF digital input source

Mix: Stereo Mix which will record all analog inputs and digital 
wave audio you are playing on PC

Aux: recording from Aux-In for typically TV-tuner card audio 
or other sound sources

Line-In: recording from Line-in jack for external audio devices

WAVE: recording from digital wave audio you are playing on 
PC (Note: Windows Vista doesn’t support WAVE recording.)

Click this button 

 to open the advanced settings for the 

Microphone-In:

Enabling “Microphone Boost” will increase a volume gain 
to boost microphone input signals. If you connect your 
microphone to the front panel audio module, enable “Front 
Panel Microphone”. For typical low-cost PC microphone, it’s 
recommended to enable this function.

Click to reset all volume controls to the default settings.