Analog Devices ADSP-21535 E-KIT LITE 用户手册
4.5.4 USB (P7)
The USB connector is a standard Type B USB receptacle. This connector is used
to debug the DSP, and is not connected to the DSP’s USB interface.
to debug the DSP, and is not connected to the DSP’s USB interface.
Part Description
Manufacturer
Part Number
Mill-Max 897-30-004-90-000
Type B USB receptacle (P7)
Digi-Key ED90003-ND
Mating Connector
Assmann AK672-5
USB cable (provided with kit)
Digi-Key AK672-5ND
4.5.5 JTAG (P8)
The JTAG header is the connecting point for a JTAG in-circuit emulator pod.
When an emulator is connected to the JTAG header, the USB debug interface is
disabled.
When an emulator is connected to the JTAG header, the USB debug interface is
disabled.
! NOTE: Pin 3 is missing to provide keying. Pin 3 in the mating connector
should have a plug.
! NOTE: When using an emulator with the EZ-KIT Lite board, follow the
connection instructions provided with the emulator.
ADSP-21535 EZ-KIT Lite Evaluation System Manual
4-13