Ampro Corporation P5X 用户手册
Little Board/P5x Technical Manual
2–3
Connector Summary
Refer to Figure 2– 1 and Figure 2– 2 for the locations of the connectors (P1, P2, J3 – J21) and
configuration jumpers (W1 – W12). Table 2– 1 summarizes the use of the I/O connectors.
configuration jumpers (W1 – W12). Table 2– 1 summarizes the use of the I/O connectors.
Each interface is described in its own section, showing connector pinouts, signal definitions,
required mating connectors, and configuration jumper options.
required mating connectors, and configuration jumper options.
Many of the connectors have a key pin removed. This allows you to block the corresponding cable
connector socket to help prevent improper assembly. Table 2– 1 indicates which pins are key pins.
connector socket to help prevent improper assembly. Table 2– 1 indicates which pins are key pins.