Toshiba EO1-11113 用户手册

– 60 –

EO1-11113

The “DISPLAY MESSAGE” here means the message to be displayed in the 16-digit dot windows of the
Operator Display panel (and Customer Display panel if the 16-digit dot windows are installed as hard-
ware option) while the Mode Lock of the terminal is in the “LOCK” position.  This display message may
be used as information, commercial message, welcoming greeting, etc.

Any time outside a sale

Mode Lock:  SET

(1 to 4;
max. 4 lines)
                                        *

(Max. 16 characters per line.
Regular-size only.)

*

Allowed for sequential Line No. only.

Repeat for other lines.

1. When the option “Store Message SCROLLING DISPLAY” is selected, four lines (Line

Nos 1 to 4) are available.  Even when the option “Store Message 16 CHARACTERS
HELD” is selected, four lines (Line Nos 1 to 4) are available.
In this case, refer to “Store Message Display” operation to display the respective
message lines.

2. When the “SCROLLING DISPLAY” option is selected, a maximum of 64 characters can

be entered consecutively after designating Line No.1 at first and depressing [ST] for each
line end.

3. The character must be regular-sized only.

4. The DISPLAY MESSAGE set here will also appear in the REG or MGR mode if so

designated by program option.

Character Entries  [ST]

| Message Line No. | [ST]

31 [X]

OPERATION

CONDITION