KYOCERA 205c.255c 用户手册

10-9

Troubleshooting > Solving Malfunctions

Printouts are not clear.

Did you choose appropriate image 
quality for the original?

Select appropriate image quality.

Dirt on the print side of the 
paper.

Is the platen or the document 
processor dirty?

Clean the platen or the document 
processor.

—

Run [Laser Scanner Cleaning].

Printouts are fuzzy.

Is the machine being used in very 
humid conditions?

Use in an environment that has 
suitable humidity.

If you experience frequent problems, 
turn the cassette heater switch on. 

—

Run [Drum Refresh].

Images are skewed.

Are the originals placed correctly?

When placing originals on the platen, 
align them with the original size 
indicator plates.

When placing originals in the 
document processor, align the original 
width guides securely before placing 
the originals.

Is the paper loaded correctly?

Check the position of the paper width 
guides.

—

Perform center line adjustment. For 
more information about how to do so, 
contact your service representative. 

—

Paper often jams.

Is the paper loaded correctly?

Load the paper correctly.

—

Change the orientation in which the 
paper is positioned.

1-15
3-3
3-7

Is the paper of the supported type? Is it 
in good condition?

Remove the paper, turn it over, and 
reload it.

Is the paper curled, folded or wrinkled? Replace the paper with new paper.

Are there any loose scraps or jammed 
paper in the machine?

Remove any jammed paper.

Printouts are wrinkled.

Is the paper damp?

Replace the paper with new paper.

If you experience frequent problems, 
turn the cassette heater switch on. 

—

Change the orientation in which the 
paper is positioned.

1-15
3-3
3-7

Cannot print.

Is the machine plugged in?

Plug the power cord into an AC outlet.

Is the machine powered on?

Turn on the main power switch.

Are the printer cable and network 
cable connected?

Connect the correct printer cable and 
network cable securely.

Was the machine powered on before 
the printer cable was connected?

Power on the machine after 
connecting the printer cable.

Is the print job paused?

Resume printing.