KYOCERA 205c.255c 用户手册
10-9
Troubleshooting > Solving Malfunctions
Printouts are not clear.
Did you choose appropriate image
quality for the original?
quality for the original?
Select appropriate image quality.
Dirt on the print side of the
paper.
paper.
Is the platen or the document
processor dirty?
processor dirty?
Clean the platen or the document
processor.
processor.
—
Run [Laser Scanner Cleaning].
Printouts are fuzzy.
Is the machine being used in very
humid conditions?
humid conditions?
Use in an environment that has
suitable humidity.
suitable humidity.
If you experience frequent problems,
turn the cassette heater switch on.
turn the cassette heater switch on.
—
Run [Drum Refresh].
Images are skewed.
Are the originals placed correctly?
When placing originals on the platen,
align them with the original size
indicator plates.
align them with the original size
indicator plates.
When placing originals in the
document processor, align the original
width guides securely before placing
the originals.
document processor, align the original
width guides securely before placing
the originals.
Is the paper loaded correctly?
Check the position of the paper width
guides.
guides.
—
Perform center line adjustment. For
more information about how to do so,
contact your service representative.
more information about how to do so,
contact your service representative.
—
Paper often jams.
Is the paper loaded correctly?
Load the paper correctly.
—
Change the orientation in which the
paper is positioned.
paper is positioned.
Is the paper of the supported type? Is it
in good condition?
in good condition?
Remove the paper, turn it over, and
reload it.
reload it.
Is the paper curled, folded or wrinkled? Replace the paper with new paper.
Are there any loose scraps or jammed
paper in the machine?
paper in the machine?
Remove any jammed paper.
Printouts are wrinkled.
Is the paper damp?
Replace the paper with new paper.
If you experience frequent problems,
turn the cassette heater switch on.
turn the cassette heater switch on.
—
Change the orientation in which the
paper is positioned.
paper is positioned.
Cannot print.
Is the machine plugged in?
Plug the power cord into an AC outlet.
Is the machine powered on?
Turn on the main power switch.
Are the printer cable and network
cable connected?
cable connected?
Connect the correct printer cable and
network cable securely.
network cable securely.
Was the machine powered on before
the printer cable was connected?
the printer cable was connected?
Power on the machine after
connecting the printer cable.
connecting the printer cable.
Is the print job paused?
Resume printing.
Symptom
Checkpoints
Corrective Actions
Reference
Page