Xerox 7335 用户手册
1
Network Connectivity
Installation Steps
Step 1. Connect one end of a Category 5 twisted pair cable to a live network drop. Connect the opposite
end of the cable to the RJ-45 socket at the rear of the Device.
end of the cable to the RJ-45 socket at the rear of the Device.
Step 2. Set the Device's power switch to ON and wait until the Main screen is displayed.
Note: The actual screen displayed as the Main screen is selectable. To determine the screen you
would like displayed, press the Log In / Out button, enter the Administrator password (default of 11111),
touch Enter, press the Machine Status button, and touch the Tools tab. Touch Common Service Settings,
touch Screen/Button Settings, select Service Screen Default, touch Change Settings, make your selection
and touch Save. Touch Close until the Tools tab is displayed. Wait for the Auto Clear service to log you
out.
would like displayed, press the Log In / Out button, enter the Administrator password (default of 11111),
touch Enter, press the Machine Status button, and touch the Tools tab. Touch Common Service Settings,
touch Screen/Button Settings, select Service Screen Default, touch Change Settings, make your selection
and touch Save. Touch Close until the Tools tab is displayed. Wait for the Auto Clear service to log you
out.
Step 3. Refer to the Configuration Report topic in this guide and print a Configuration Report using the
instructions supplied.
instructions supplied.
Machine
Status
Status
Log In / Out
All Services