Q-Logic 8100 SERIES 用户手册

4–Installation in a Linux Environment
Firmware Upgrades

4-24

FE0254601-00 A

4.

In the right pane, click the FCoE tab (

). The MPI firmware 

version is listed under the Information section.

The sysfs interface is available to advanced users to display the adapter firmware 
version. To display the FCoE adapter firmware version, log in as root, and type the 
following command, where X is the host number:

#cat /sys/class/scsi_host/hostX/fw_version
5.03.02 (8d4)

To display the MPI firmware version, log in as root, and type the following 
command:

#cat /sys/class/scsi_host/hostX/mpi_version
1.40.00 (10400)

You can upgrade the boot code using the QConvergeConsole or the BIOS and 
UEFI management utilities.

Updating the boot code applies to the adapter and not for individual ports. For a 
multi-port adapter, you can update the boot code (flash image) only through the 
first port.

To update boot code using the QConvergeConsole:

1.

Expand the adapter port number 1, then select the FCoE port.

2.

In the right pane, click the Utilities tab.