Q-Logic 8100 SERIES 用户手册

5–Installation in a VMware Environment
Installing the FCoE and Networking Drivers

5-8

FE0254601-00 A

24. Unmount the first ISO file from the ESX host server by issuing the following 

command:

# umount /mnt/cdrom

25. Reboot the ESX host server to complete the driver installation and exit 

maintenance mode.

To verify that the Converged Network Adapter drivers are installed on the VMware 
ESX/ESXi 4.0 host server, log in to the service console as root, and then type the 
vmkload_mod command, as shown in 

. The qlge (networking driver) 

and qla2xxx (FCoE driver) entries should show Yes in the last column.

Use the console operating system to identify Converged Network Adapters on a 
VMware ESX/ESXi 4.0 system.

To validate the Converged Network Adapter driver and firmware versions:

1.

Discover the device using lspci.

2.

List the subdirectories by issuing the following command:

# ls /proc/scsi:

If the qla2xxx directory is present, the QLogic FCoE adapter driver is 

installed on the VMware ESX/ESXi 4.0 host server.

3.

List the QLogic FCoE adapters present on the ESX host server by issuing 
the following command:

# ls /proc/scsi/qla2xxx
1  2  3  4  5  6  

4.

Display additional details for a specific FCoE adapter by issuing the 
following command:

# cat /proc/scsi/qla2xxx/<adapter_number> 

In this command, <adapter_number> is an adapter number.