Q-Logic 8100 SERIES 用户手册

6–Configuring NIC Functionality in the Converged Network Adapter
Configuring the NIC in a Windows Environment

6-24

FE0254601-00 A

12. After successfully assigning a VLAN ID to the team or interface, a new 

logical interface appears in the Microsoft Windows Network Connections 
window as shown in 

, and the local area connection for the 

teaming logical interface would be disabled.

13. Complete the configuration of the VLAN ID assignment by assigning a 

dynamic or static IP address to this enabled logical interface. The Windows 
command, ipconfig /all, lists the newly created logical interface but not 

the physical interfaces and the teaming logical interface. These interfaces 
are not listed because the logical team interface is visible to the operating 
system for all operations, while the QLogic VLAN/teaming driver manages 
the physical interfaces and teaming.

To remove VLAN ID assignments from a physical interface or team:

1.

Start QConvergeConsole CLI by clicking its desktop icon.

2.

In the Main Interactive Menu, type 4,and then press ENTER to select 

Configure VLANs Menu.

3.

In the Configure VLANs menu, type 4,and then press ENTER to select 

Remove VLAN from Port or Team (

). 

a.

Choose an entry from the list of physical interfaces and teams from 
which to remove a VLAN ID assignment.

b.

At the prompt, Select ListIndex from the list, type the 

number that corresponds to the chosen physical interface or team, and 
then press ENTER.

c.

At the prompt, Enter VLAN ID (1..4095), type the VLAN ID to be 

removed from the physical interface or team, or type All and press 

ENTER to remove all VLAN ID assignments.

Creating, modifying, or dissolving network VLANs can cause loss of 
connectivity. Do not attempt to configure VLANs on production systems.