Q-Logic 8100 SERIES 用户手册

6–Configuring NIC Functionality in the Converged Network Adapter

Configuring the NIC in a Linux Environment

FE0254601-00 A

6-51

2.

Enter the ifconfig command, and examine the output. 

 shows 

that the bond0 interface status and IP address information. The MAC 
addresses for the two bonded ports (eth0 and eth1) are the same. After the 
bond has been brought down and the bonding driver removed, the original 
MAC addresses are restored.

To disable a bonding interface, issue the following command:

# ifconfig bondX down

In this command, bondX is the bonding interface. For example:

# ifconfig bond0 down

To remove a physical network interface from a bond, enter the following 
command:

# ifenslave -d bondX ethY

In this command:



bondX is the bonding interface.



ethY is the physical network interface to be removed from bondX

For example:

# ifenslave -d bond0 eth1