Q-Logic 8100 SERIES 用户手册

7–Configuring FCoE in a Windows Environment
N_Port ID Virtualization

7-10

FE0254601-00 A

2.

Inspect the switch Fibre Channel database to verify that the vPort has 
logged into the connected NPIV-enabled FCoE switch. Refer to the 
corresponding switch documentation for details.

3.

If possible, verify that the vPort has logged in to the storage array through 
the storage array management interface.

4.

Using the Device Manager, inspect the Disk Manager to verify that all LUNs 
presented to the vPort through the zoned storage array ports are visible to 
the Microsoft Windows operating system.

This subsection describes how to delete virtual adapter ports using 
QConvergeConsole GUI. For information about deleting virtual adapter ports 
using QConvergeConsole CLI, refer to the QConvergeConsole CLI User’s Guide.

To delete one or more virtual ports, connect the QConvergeConsole window to the 
server that houses the QLogic 8100 Series Adapter, then follow these steps:

1.

In the system tree, expand a QLogic 8100 Series Adapter, and then expand 
the port number to view the FCoE port node.

2.

Select the FCoE port node.

3.

Select the Virtual tab in the right pane. 

4.

Select the port you want to delete:



To delete an individual port, click the individual port displayed in the list 
box. 



To delete more than one port, press and hold the CTRL key while 
selecting the ports. 

Deleting or removing a virtual port is disruptive and should not be performed 
on a production system or while I/O operations are in progress on LUNs that 
are being accessed through the virtual port.