Q-Logic 8100 SERIES 用户手册

8–Configuring FCoE in a Linux Environment

Using the QLogic Linux Utilities

FE0254601-00 A

8-53

The Set Device Command Timeout utility can set the timeout value for target 
devices on a selected host, or it can set a common value for all devices on all 
hosts. This utility sets a timeout value for each target port and applies to all LUNs 
that are visible through that target port. This utility does not apply to targets that 
are visible through QLogic adapter virtual ports.

 describes the files in the Set Device Command Timeout utility 

package.

This utility has a line command interface and a menu interface.

To display the timeout values for devices connected to a specified host ID, issue 
the following command:

# ./ql-set-cmd-timeout.sh <HOST #>

To display the timeout values for devices connected to a specified target and host 
ID, issue the following command:

# ./ql-set-cmd-timeout.sh <HOST #> <TARGET #>

To set the timeout values for devices connected to a specified target and host ID, 
issue the following command:

# ./ql-set-cmd-timeout.sh <HOST #> <TARGET #> <TIMEOUT #>

If you omit all command options, the utility displays the timeout values on devices 
connected to the all QLogic Converged Network Adapter ports.

                                                                                           

COPYING 

GNU general public license that describes rights to 
copy, distribute, and use the open source content in 
this Linux tool

ql-set-cmd-timeout.sh

Script file that sets the timeout on the devices con-
nected to the QLogic Converged Network Adapter

README.ql-set-cmd-timeout.txt

Readme file

revision.qlsetcmdtimeout.txt

Text file that explains the changes that are new in 
this version of the package