Q-Logic 8100 SERIES 用户手册
9–Offline Utilities
Fast!UTIL
Fast!UTIL
9-6
FE0254601-00 A
Selectable Boot Settings
The Selectable Boot Setting option opens the Selectable Boot Settings window
(
(
), from which you can select one or more remote Fibre Channel drives
to serve as a boot device. To preserve boot device specifications that you make,
you must also enable the Host Bus Adapter BIOS parameter, described in
you must also enable the Host Bus Adapter BIOS parameter, described in
. For information about configuring a server to boot from SAN, refer to
.
Figure 9-5. Selectable Boot Setting Window
describes the selectable boot setting parameters.
Fibre Channel
Tape Support
Tape Support
Enables or disables FCP-2 recovery. Disable Fibre Channel Tape
Support if the adapter is connected to a storage subsystem and not
to a tape device. Most storage subsystems do not support sending
I/O from the same adapter to both a storage subsystem and a tape
device. The default is enabled.
Support if the adapter is connected to a storage subsystem and not
to a tape device. Most storage subsystems do not support sending
I/O from the same adapter to both a storage subsystem and a tape
device. The default is enabled.
Table 9-1. Adapter Setting Parameters (Continued)
Parameter
Description