Avery 6057 用户手册
U S I N G T H E S U M M I T C L I E N T U T I L I T Y
3
Use this chapter to configure the 802.11b/g wireless (radio) card settings.
The Summit SDC-CF10G1 802.11g wireless card operates at speeds of up to 11Mbps in
802.11b mode and 54Mbps in 802.11g mode on any wireless-compatible network. You can use
the printer in Ad-Hoc (peer-to-peer) or Infrastructure (access point) wireless mode. Use the
Summit Client Utility (SCU) available on your printer to configure your wireless card to
communicate with your network.
802.11b mode and 54Mbps in 802.11g mode on any wireless-compatible network. You can use
the printer in Ad-Hoc (peer-to-peer) or Infrastructure (access point) wireless mode. Use the
Summit Client Utility (SCU) available on your printer to configure your wireless card to
communicate with your network.
To start the Summit Client Utility, touch the Home key, then select Wi-Fi. You see the main
SCU window.
SCU window.
Note:
If you cannot access the Summit Client Utility, check the System Lockdown settings.
You may need to be in Admin Mode to access wireless features. See “
” for more information.
The main window shows the active profile, current wireless status (Down, Disabled, Not
Associated, Associated, or Authenticated), the radio type, the regulatory domain, and the driver
version. From the main window you can also log in as administrator to make changes to radio
settings, and disable or enable the radio.
Associated, Associated, or Authenticated), the radio type, the regulatory domain, and the driver
version. From the main window you can also log in as administrator to make changes to radio
settings, and disable or enable the radio.
Using the Summit Client Utility 3-1