Baldor MN850 用户手册

3-10 Operation

MN850

Stop Pedestal Voltage

Stop Pedestal Voltage is the percentage of line voltage applied to the motor after a stop
command. Programmed as parameter 16 or as Stop Pedestal in Basic Menu.

Stop Time

Time in seconds after a stop command to ramp down the motor voltage (Stop Time 1 or 2)
Stop Time 1 with low voltage ramp active. Stop Time 2 with no low voltage ramp.
Programmed as parameter 17 or as Stop Time in Basic Menu.

Stop Smoothing

Adjustable voltage ramp for smooth deceleration.  Motor current is monitored and stop
smoothing will continue until the Start Pedestal value is reached.
Programmed as parameter

Run Voltage

Full voltage or Running Voltage

Start Pedestal Voltage

Start Pedestal Voltage – end of stop smoothing and beginning of low voltage ramp to zero
volts (if low voltage ramp is active). Programmed as parameter 11 or as Start Pedestal in
Basic Menu.

Motor
Voltage

Stop Pedestal
Voltage

Stop 
Time 2

Run 
Voltage

Full Voltage

Stop

Time

Stop Time 1

Stop Pedestal

Stop Smoothing

End of Stop Smoothing

Low Voltage Ramp

Start Pedestal
Voltage

Smoothing Effect

Ideal

Actual

When Remote Starting is selected, the keypad Start/Stop pushbutton is not active.

Press Start/Stop key
(Keypad Stop)

Displays motor starting current
and full voltage and current.

Stopping
Current

8A

Begins the Stop operation

Remove the 115VAC
from S0 and S1.
(Remote Stop)

Stopping
Current

8A

Begins the Stop operation