Muratec F-114 Series 用户手册

T

ROUBLESHOOTING

9.19

Character voids are white areas within the parts of 

characters that should be solid black:

• If you are using transparencies, try another type of 

transparency. Due to the composition of the transparency, 

some character voids are normal. 

• You may be printing on the wrong surface on the paper. 

Remove the paper and turn it around. 

• The paper may not meet paper specifications. See “Paper 

If horizontally aligned black streaks or smears appear:

• The toner cartridge may be installed improperly. Remove and 

reinsert the cartridge.

• The toner cartridge may be defective. Remove the toner 

cartridge and install a new one. See “Replacing the Toner 

• If the problem persists, the machine may require repair. 

Contact a service representative.

If the printed paper is curl or paper does not feed into the 

printer:

• Turn the stack of paper over in the paper tray. Also try 

rotating the paper 180° in the paper tray. 

• Try printing to the rear output slot.

Copies are too light or too 

dark.

Use the Darkness button to darken or lighten the 

background of the copies.

Smears, lines, marks or 

spots appears on copies.

• If defects are on the original document, press the 

 button to lighten the background of your 

copies.

• If no defects are on the original document, clean the 

Scan unit. See page 8.5.

Copy image is skewed.

• Ensure that the original document is positioned 

correctly in the ADF (Automatic Document Feeder).

• Check that the copy paper is loaded correctly.

Blank copies print out.

Ensure that the original document is face down in the 

ADF.

AaBbCc
AaBbCc
AaBbCc

AaBbCc
AaBbCc