Wacom PTK-650 用户手册

88

88

TESTING THE WIRELESS CONNECTION

A tablet status LED should glow whenever the tablet is properly connected and your computer has 
recognized it as a USB device.  If you encounter problems with the wireless connection, perform the 
following checks.

1. First check the general 

 procedures.

2. Verify that the wireless module is on.  See 

.

3. Verify that the wireless module and receiver are properly installed.  See 

.

4. Check the battery power.  See 

.  If the battery charge is low, 

connect the USB cable and charge the battery.  See 

5. Switch the wireless module off, and then back on.

6. Move the tablet closer to the computer.  Make sure there are no metal or other high density 

obstructions in the line of sight between the tablet and computer.

7. Open the Wacom Tablet control panel and click on the A

BOUT

 button.  In the dialog box that appears, 

click D

IAGNOSE

....  The D

IAGNOSTICS

 dialog box shows dynamic information about the tablet.  Check the 

W

IRELESS

 M

ODE

 entry to determine if the wireless status is O

N

.  When you are done, click the C

LOSE

 

button to exit the dialog box.

If these tests fail, you may have defective hardware.  See 

.