Samsung SF-370 Series 用户手册

When you send a fax, if the number you have dialled is busy or there is no answer, the machine will attempt to 

redial the number every three minutes up to two times.

Before redialling, the display shows 

To redial now, press Start Fax

.

If you want to redial the number immediately, press 

. 

Or, press 

 to cancel redialling and then the machine returns to Standby Mode.

Before you receive a fax, be sure to load one of the supported paper sizes for receiving faxes. For information on 

what paper types you can use, see "Paper type and sizes" on page 1.5.

Your fax machine has various reception modes; FAX, TEL, AUTO, TAM

4

 and DRPD. For DRPD Mode, see 

"DRPD Mode" on page 6.10. first. If you are an SF-375TP user, you have to press the 

 button to select 

TAM mode. Do not press the 

 button. You can change the reception mode by pressing 

 when no document is loaded. The following chart describes how each reception mode works:

If you rarely use the fax line for voice conversation, set the machine to receive faxes automatically by selecting 

either FAX or AUTO Mode. 

4.TAM: Telephone Answering Machine. SF-375TP only.

Reception 

mode

Your model

How it works

Reference section

FAX

All

The machine answers an incoming call and immediately 
goes into receive mode, expecting a fax to be received.

TEL

The automatic fax reception is turned off. You can receive a 
fax only by manually pressing 

.

AUTO

Your fax machine will answer faxes automatically after the 
number of rings you specify. If the machine does not pick up 
a fax signal, it will give another ringing tone to tell you it is a 
phone call. You should lift the handset to answer the call. If 
you do not pick up the handset on your fax machine, it will 
switch to the automatic reception mode.

TAM

SF-375TP

Your machine plays a greeting message to callers, and then 
the caller can leave an incoming message on your machine 
as well as a fax.