Ricoh 2400L 用户手册
❐
Select whether or not your machine transmits a forwarding mark to be printed
at the other end on the top of each page of the printout.
at the other end on the top of each page of the printout.
If the RTI/CSI of the machine sending you a fax is not the same as any of those
that you have programmed into this feature, the message will not be forwarded.
that you have programmed into this feature, the message will not be forwarded.
Cross-references:
RTI and CSI: see page 205.
Journal: see page 137.
Wild Cards: see page 102.
Programming the Forwarding Feature
This section shows you how to set up your machine to forward incoming fax
messages to another location or locations.
messages to another location or locations.
1. Function 6 2 2 2 2 8 2 and Yes.
To print a list, press
2. Yes.
3. Store a forwarding station number.
Example: 2 1 2 5 5 5 1 2 3 4
If your machine is behind a PBX, add
the access code before the number, un-
less this forwarding station is an exten-
sion connected to the same PBX as
your machine. And press Yes.
If your machine is behind a PBX, add
the access code before the number, un-
less this forwarding station is an exten-
sion connected to the same PBX as
your machine. And press Yes.
4. Either:
❐
If you wish
all incoming messages
to be forwarded to this station: No.
Do not store any RTIs/CSIs for it.
Do not store any RTIs/CSIs for it.
❐
If you only wish messages from cer-
tain senders to be forwarded to this
station:Input their RTIs or CSIs (mes-
sages from senders other than
these will not be forwarded to this
station): Yes and go to step 5.
tain senders to be forwarded to this
station:Input their RTIs or CSIs (mes-
sages from senders other than
these will not be forwarded to this
station): Yes and go to step 5.
!
AD
V
A
NCED
FEA
T
URES
ADVANCED FEATURES
RECEPTION
93