Netgear FVS318N 用户手册
Firewall Protection
157
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make a selection from the following drop-down list:
make a selection from the following drop-down list:
•
Select Schedule
4.
Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
automatically enabled.
Create LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is
blocked.
any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is
blocked.
IPv4 LAN DMZ Inbound Service Rules
To create a new IPv4 LAN DMZ inbound rule:
1.
In the upper right of the LAN DMZ Rules screen, the IPv4 radio button is selected by default.
The screen displays the IPv4 settings (see
The screen displays the IPv4 settings (see
Click the Add table button under the Inbound Services table. The Add LAN DMZ Inbound
Service screen for IPv4 displays:
Service screen for IPv4 displays:
Figure 79.
2.
Enter the settings as explained in
on page 135. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
drop-down lists:
•
LAN Users
•
DMZ Users