ZyXEL Communications ADSL2+4 用户手册
Chapter 15 Remote Management
P-660H-T1v3s User’s Guide
154
The following table describes the labels in this screen.
15.3 The Telnet Screen
You can use Telnet to access the P-660H-T1v3s’s command line interface. Specify
which interfaces allow Telnet access and from which IP address the access can
come.
which interfaces allow Telnet access and from which IP address the access can
come.
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 63 Advanced > Remote Management > Telnet
Table 44 Advanced > Remote Management > WWW
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service, if needed.
However, you must use the same port number in order to use that
service for remote management.
However, you must use the same port number in order to use that
service for remote management.
Server Access
Select the interface(s) through which a computer may access the P-
660H-T1v3s using this service.
660H-T1v3s using this service.
Secured Client
IP Address
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the P-660H-T1v3s using this service.
with the P-660H-T1v3s using this service.
Select All to allow any computer to access the P-660H-T1v3s using this
service.
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the P-660H-T1v3s using this service.
you specify to access the P-660H-T1v3s using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.