ZyXEL Communications ADSL2+4 用户手册
Chapter 15 Remote Management
P-660H-T1v3s User’s Guide
157
The following table describes the labels in this screen.
15.6 The DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP
address and vice versa. Refer to
address and vice versa. Refer to
for background
information.
Use this screen to set from which IP address the P-660H-T1v3s will accept DNS
queries and on which interface it can send them your P-660H-T1v3s’s DNS
settings. This feature is not available when the P-660H-T1v3s is set to bridge
mode. Click Advanced > Remote MGMT > DNS to change your P-660H-T1v3s’s
DNS settings.
queries and on which interface it can send them your P-660H-T1v3s’s DNS
settings. This feature is not available when the P-660H-T1v3s is set to bridge
mode. Click Advanced > Remote MGMT > DNS to change your P-660H-T1v3s’s
DNS settings.
Figure 66 Advanced > Remote Management > DNS
Table 47 Advanced > Remote MGMT > SNMP
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
however you must use the same port number in order to use that
service for remote management.
Server Access
Select the interface(s) through which a computer may access the P-
660H-T1v3s using this service.
660H-T1v3s using this service.
Secured Client IP
Address
Address
A secured client is a “trusted” computer that is allowed to
communicate with the P-660H-T1v3s using this service.
communicate with the P-660H-T1v3s using this service.
Select All to allow any computer to access the P-660H-T1v3s using
this service.
this service.
Choose Selected to just allow the computer with the IP address that
you specify to access the P-660H-T1v3s using this service.
you specify to access the P-660H-T1v3s using this service.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.