D-Link AV 500 用户手册
25
D-Link DHP-W310AV User Manual
Section 3 - Configuration
System
Save Settings To
Local Hard Drive:
Load Settings From
Local Hard Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Clear Language
Pack:
Use this option to save the current
DHP-W310AV configuration settings to a file
on the computer you are using. Click the Save
button. You will then see a file dialog where
you can select a location and file name for
the settings.
Use this option to load previously saved
DHP-W310AV configuration settings.
Click Browse to find a previously saved
configuration file. Then, click the Upload
Settings button to transfer those settings to
the DHP-W310AV.
This option will restore all configuration settings back to the settings that were in effect at the time the DHP-W310AV was
shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you
would like to save the current DHP-W310AV configuration settings, use the Save button above.
Click to reboot the DHP-W310AV.
Clears any language pack that is currently installed. For more about language packs, refer to “Firmware” on page 26.
This page lets you both save and delete settings on your DHP-W310AV.