Enfora MLG0208PB001 用户手册
Enfora Enabler II-G Assisted GPS
Modem Integration Guide
Modem Integration Guide
14.8.1. OEM Responsibilities for All Products Containing the Enabler II-G A-GPS module
In addition to any other regulatory requirements, OEMs and integrators must include or provide
the following information, instructions, warnings and labels with any device or product into which
the Enfora Enabler II-G A-GPS GSM1900 GSM transceiver has been incorporated:
the following information, instructions, warnings and labels with any device or product into which
the Enfora Enabler II-G A-GPS GSM1900 GSM transceiver has been incorporated:
Information
Description
Detailed
Operating
Instructions
Operating
Instructions
for
ensuring
compliance with
current FCC
guidelines which
limit human
exposure to radio
frequency
radiation
compliance with
current FCC
guidelines which
limit human
exposure to radio
frequency
radiation
The OEM must provide an operating/installation manual with the final
product which clearly indicates that these operating conditions and
restrictions must be observed at all times to ensure compliance with current
FCC guidelines which limit human exposure to radio frequency radiation.
20 cm (7.87 inch) separation distance between the antenna and all persons
must be maintained at all times for all fixed and mobile products and
applications
Portable devices and applications are prohibited unless such devices and
products are specifically authorized by the FCC
Maximum antenna gain is limited to 3 dBi* in mobile products and
applications
Maximum antenna gain is limited to 7 dBi* in fixed products and
applications.
Modifications and/or additions to the Enfora Enabler II-G A-GPS GSM
transceiver, including use of antennas with higher gain than those
authorized by the FCC, are prohibited
*dBi = antenna gain in dB relative to an isotropic radiator
product which clearly indicates that these operating conditions and
restrictions must be observed at all times to ensure compliance with current
FCC guidelines which limit human exposure to radio frequency radiation.
20 cm (7.87 inch) separation distance between the antenna and all persons
must be maintained at all times for all fixed and mobile products and
applications
Portable devices and applications are prohibited unless such devices and
products are specifically authorized by the FCC
Maximum antenna gain is limited to 3 dBi* in mobile products and
applications
Maximum antenna gain is limited to 7 dBi* in fixed products and
applications.
Modifications and/or additions to the Enfora Enabler II-G A-GPS GSM
transceiver, including use of antennas with higher gain than those
authorized by the FCC, are prohibited
*dBi = antenna gain in dB relative to an isotropic radiator
Antenna
Avoidance
Label
Attach the following warning label
directly to or displayed next to the
antenna. Furthermore, this label must
be visible to and easily readable by all
persons in the immediate vicinity of the
antenna
directly to or displayed next to the
antenna. Furthermore, this label must
be visible to and easily readable by all
persons in the immediate vicinity of the
antenna
WARNING
To comply with FCC RF
exposure requirements, a
separation distance of 20 cm
(7.87”) or more must be
maintained between this
antenna and all persons
Human Exposure
Compliance
Statement
Compliance
Statement
Include the following statement in the
instruction / operation manual.
instruction / operation manual.
Enfora certifies that the Enfora
Enabler II-G A-GPS ™ MHz
GSM Radio Module (FCC ID:
MIVMLG0208) complies with the
RF hazard requirements
applicable to broadband PCS
equipment operating under the
authority of 47 CFR Part 22 or
Part 24, Subpart E of the FCC
Rules and Regulations.
This certification is contingent
upon installation, operation and
use of the
Enfora Enabler II-G A-GPS
module and its host product in
accordance with all instructions
provided to both the OEM and
end used. When installed and
operated in a manner consistent
with the instructions provided,
the Enfora Enabler II-G A-GPS
Enabler II-G A-GPS ™ MHz
GSM Radio Module (FCC ID:
MIVMLG0208) complies with the
RF hazard requirements
applicable to broadband PCS
equipment operating under the
authority of 47 CFR Part 22 or
Part 24, Subpart E of the FCC
Rules and Regulations.
This certification is contingent
upon installation, operation and
use of the
Enfora Enabler II-G A-GPS
module and its host product in
accordance with all instructions
provided to both the OEM and
end used. When installed and
operated in a manner consistent
with the instructions provided,
the Enfora Enabler II-G A-GPS
MLG0208PB001
70
Version1.01 – 10/3/2006