Focus Enhancements FS-100 用户手册

下载
页码 162
FS-100 Portable DTE Recorder
23
Charging the Battery 
The battery begins charging anytime it is connected to AC 
power using the AC adapter supplied with the FS-100. The 
charge LED lights when the FS-100 is charging. For information 
on the charge LED, refer to the subsection 
Before the battery can be used it must charge until the battery 
status LED indicates the unit is fully charged (green). 
• The Charge LED on the top of the FS-100 lights to show the 
battery is charging. 
• An uncharged battery takes 2-3 hours to charge with the 
unit powered off. 
• The battery provided with the FS-100 can supply power to 
the unit for about 90 minutes while in continuous Record or 
Playback mode.
• An optional high capacity battery (
BATT-0009-01
) capable of 
providing power for almost three hours of continuous 
recording is available from Focus Enhancements. 
Using FireWire to Charge FS-100
It is possible to charge the FS-100 battery through the 1394 port on a 
computer provided that the computer outputs at least 15V through the 
port. To determine if this is possible, consult the computer’s 
specifications.