Transition Networks SBFTF1011-140 Stand-Alone Media Converter SBFTF1011-140 用户手册

12

The physical characteristics must meet or exceed IEEE 802.3™ specifications. 

Bit Error Rate:  

<10-9

Single mode fiber (recommended):

9 µm 

Multimode fiber (recommended):

62.5/125 µm 

Multimode fiber (optional):  

100/140, 85/140, 50/125 µm 

1300 nm multimode

1300 nm multimode

Fiber Optic Transmitter Power:

min: -19.0 dBm

max: -14.0 dBm

Fiber Optic Receiver Sensitivity:

min: -30.0 dBm

max: -14.0 dBm

Link Budget:

11.0 dB

1310 nm single mode

Fiber-optic Transmitter Power:

min: -15.0 dBm

max: -8.0 dBm

Fiber-optic Receiver Sensitivity:

min: -31.0 dBm

max: -8.0 dBm

Link Budget:

16.0 dB

(long haul)

1310 nm single mode

Fiber-optic Transmitter Power:

min: -8.0 dBm

max: -2.0 dBm

Fiber-optic Receiver Sensitivity:

min: -34.0 dBm

max: -7.0 dBm

Link Budget:

26.0 dB

(extra long haul)

1310 nm single mode

Fiber-optic Transmitter Power:

min: -5.0 dBm

max: 0.0 dBm

Fiber-optic Receiver Sensitivity:

min: -34.0 dBm

max: -7.0 dBm

Link Budget:

29.0 dB

(long wave length)

1550 nm single mode

Fiber-optic Transmitter Power:

min: -5.0 dBm

max: 0.0 dBm

Fiber-optic Receiver Sensitivity:

min: -34.0 dBm

max: -7.0 dBm

Link Budget:

29.0 dB

1300 nm multimode

Fiber Optic Transmitter Power:

min: -19.0 dBm

max: -14.0 dBm

Fiber Optic Receiver Sensitivity:

min: -33.5 dBm

max: -14.0 dBm

Link Budget:

14.5 dB

1310 nm single mode

Fiber-optic Transmitter Power:

min: -11.0 dBm

max: -3.0 dBm

Fiber-optic Receiver Sensitivity:

min: -20.0 dBm

max: -3.0 dBm

Link Budget:

9.0 dB

1310 nm (TX) / 1550 nm (RX) simplex

1550 nm (TX) / 1310 nm (RX) simplex

Fiber-optic Transmitter Power:

min: -13.0 dBm

max: -6.0 dBm

Fiber-optic Receiver Sensitivity:

min: -32.0 dBm

max: -3.0 dBm

Link Budget:

19.0 dB

1310 nm (TX) / 1550 nm (RX) simplex

1550 nm (TX) / 1310 nm (RX) simplex

Fiber-optic Transmitter Power:

min: -8.0 dBm

max: -3.0 dBm

Fiber-optic Receiver Sensitivity:

min: -33.0 dBm

max: -3.0 dBm

Link Budget:

25.0 dB

For use with Transition Networks Model SBFTF10xx-14x or equivalent.

IEEE 802.3™

10 Mb/s, 100 Mb/s

3.25" x 1.75" x 4.8" (82 x 43 x 122 mm)

13 oz. (369 g) (approximate)

4.95 watts

48,000 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
129,000 hours (Bellcore7 V5.0)

Memory:  256K bytes (2 Mbit)
Unicast MAC addresses:  4 K 
Maximum packet size:  1536 bytes

12VDC, 0.8 A (North America, Europe, Japan, U.K.)
12VDC, 1.25 A (Latin America, Australial, N.Z., S. Africa)
The external power supply provided with this product is UL 
listed by the power supply’s manufacturer.

Tmra*:

0 to 50°C (32 to 122°F )

Storage Temp:

-20 to 85°C (-4 to 185°F)

Humidity:

5 to 95%, non condensing 

Altitude:

0 to 10,000 feet

Lifetime

*Manufacturer’s rated ambient temperature.

The information in this user’s guide is subject to change.  For the most up-to-date
information, please see the user’s guide on-line at:  www.transition.com

13

(Minimum requirement for 10 Mb/s operation)

Gauge

24 to 22 AWG

Attenuation 

11.5 dB/100m @ 5-10 MHz

Maximum Cable Distance

100 meters

(Minimum requirement for 100 Mb/s operation)

Gauge

24 to 22 AWG

Attenuation 

22.0 dB /100m @ 100 MHz

Maximum Cable Distance

100 meters

• Straight-through (MDI) or crossover (MDI-X) twisted-pair cable may be used.
• Shielded (STP) or unshielded (UTP) twisted-pair cable may be used.
• Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .
• Use only dedicated wire pairs for the active pins:

(e.g., blue/white & white/blue, orange/white & white/orange, etc.)

• Do not use flat or silver satin wire.