Royal Sovereign RSH-1050 用户手册

1. Disassemble both the Right cover and the Left cover. (Note :Turn the fastening nut of the Emergency 

    switch counterclockwise and disaasemble the Emergency switch before disassembling the Right cover.)  

   

2. Disassemble the Rear cover.

3. Disassemble the power switch bracket which is located at the left side of the machine.

4. Put the Plate-Rewinder L on the outer side of the frame as shown in the following figure
    and fasten it with six  M5 screws.

5. Put the Plate-Rewinder R on the outer side of the frame as shown in the following figure
    and fasten it with six  M5 screws.

6. Insert the male connector from the Rewinder motor into the female connector from the 

M5 screw 6EA

Power switch  bracket

Plate-Rewinder L

Plate-Rewinder R

 

- 6 -