Royal Sovereign RSL-2701U 用户手册

13

 2.5  Poor Lamination Quality

Problem:  Straight wave lines across the output.

Cause:  Excessive front roller pressure.

Measure:  Loosen the front roller pressure.

Problem:  Concave waves in the lamination.

Cause:  Excessive rear (pulling) roller pressure.

Measure:  Loosen the rear back roller pressure.

Problem:  Angled waves on both sides of the output.

Cause:  Insufficient rear roller pressure.

Measure:  Tighten the rear roller pressure.

Problem:  Angled waves on one side of the output.

Cause:  Insufficient rear left (or right) side roller pressure.

Measure:  Tighten the rear left (or right) side roller pressure.

Problem:  Straight waves in the output.

Cause:  Excessive heat at the nip rollers.

Measure:  Lower the roller temperature.

Problem:  Wake waves.

Cause:  Insufficient heat at the nip rollers.

Measure:  Raise the roller temperature.

11