JVC MP-XV841GB 用户手册
(No.XE003)1-3
SECTION 3
DISASSEMBLY
3.1
Disassembly procedure
3.1.1 Removing the DIMM cover(See Figure 1)
(1) Remove three screws A from the DIMM cover on the bot-
tom of the main unit.
(2) Remove the DIMM cover by lifting it up from the gap a.
Fig.1
3.1.2 Removing the DVD drive unit(See Figure 2)
• Prior to the following procedure, DIMM cover should be re-
• Prior to the following procedure, DIMM cover should be re-
moved.
(1) Remove two screws B, which are attached to the DVD
drive unit, from the bottom of the main unit.
(2) Push part b in the direction indicated by the arrow, then pull
out the DVD drive unit by sliding outward.
Fig.2
3.1.3 Removing the fitting(See Figure 2, Figure 3)
• Prior to the following procedure, DVD drive unit should be
• Prior to the following procedure, DVD drive unit should be
removed.
(1) Eject the tray by inserting a piece of fine wire into the small
hole c.
(2) Disengage three tabs d, and then disengage one hook e.
* Pay special attention not to damage either the tabs or
the hooks.
the hooks.
Fig.3
A
A
A
Gap a
DIMM Cover
B
B
Hole c
Part b
DVD Drive unit
Hook e
Fitting
Tab d
Tab d
Tab d
DVD Drive unit