Motorola MT2070 用户手册

Radio Communications 4 - 19

The charging cradle with radio supports two radio communication modes of operation, allowing the device to 
communicate wirelessly:

Point-to-Point

Multipoint-to-Point.

In Point-to-Point communication mode, the cradle allows one device to connect to it at a time. In this mode, the 
device is paired to the cradle either by insertion into the cradle (if pairing on contacts is enabled, 

), or by 

scanning the PAIR bar code on the cradle. Communication can be locked, unlocked (default), or in a lock override 
state (see 

). In locked mode, locking intervals must be set by scanning a

connection 

maintenance interval bar code beginning on 

To activate this mode of operation, scan Point-to-Point.

In Multipoint-to-Point communication mode, up to seven devices can be paired to one cradle.

To activate this mode, the first device connected to the cradle must scan the Multipoint-to-Point bar code. This 
mode allows a parameter broadcast (

) that clones all devices paired to the cradle so only one device 

needs to be programmed.

To select Point-to-Point or Multipoint-to-Point mode, scan the appropriate bar code.

In both multipoint-to-point mode and single point mode, enable Parameter Broadcast to store parameter updates 
from the cradle. Disable Parameter Broadcast to ignore parameter configurations that come up from the cradle. In