Motorola MT2070 用户手册
5 - 2
MT2070/MT2090 User Guide
Scanning Sequence Examples
In most cases, scanning one bar code sets the parameter value. For example, to set the beeper tone to high, scan
the High Frequency (beeper tone) bar code listed under
the High Frequency (beeper tone) bar code listed under
. The device issues a fast
warble beep and the LED turns green, signifying a successful parameter entry.
Other parameters, such as Serial Response Time-Out or Data Transmission Formats, require scanning several
bar codes. See these parameter descriptions for this procedure.
bar codes. See these parameter descriptions for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
User Preferences/Miscellaneous Options Parameter Defaults
lists defaults for user preferences parameters. Scan the appropriate bar codes in this guide. These new
values replace the standard default values in memory. To recall the default parameter values, scan the
NOTE
See
for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 5-1
User Preferences Parameter Defaults
Parameter
Parameter
Number
Default
Page Number
User Preferences
Set Default Parameter
Set Defaults
Host Mode
F1h A4h
Cable Priority
Decode Pager Motor Enable
F1h 65h
Disable
Parameter Bar Code Scanning
ECh
Enable
Adaptive Scanning
F1 CD
Enable
Beep After Good Decode
38h
Enable
Beeper Tone
91h
Medium
Beeper Volume
8Ch
High
Hand-Held Trigger Mode
8Ah
Standard (Level)
Picklist Mode
F0h 92h
Disabled Always
Decode Session Timeout
88h
9.9 Sec
Timeout Between Decodes, Same Symbol
89h
0.5 Sec
Hand-Held Decode Aiming Pattern
F0h 32h
Enable