Motorola MT2070 用户手册

Getting Started 1 - 13

To insert the device in the cradle:

Insert the device into the cradle top first. 

Push the handle until it clicks into place, engaging the contacts in the cradle and device.

To remove the scanner from a vertically mounted cradle, remove the bottom of the scanner first then gently pull the 
top of the scanner out of the cradle.

For best performance, fully charge the device battery before using the device for the first time. To charge the 
device battery, place the device in the cradle (see 

). The battery begins 

charging when the device LED indicator starts flashing green. (With the exception of several initial charge cycles, 
the default state of the LED is off when the battery is fully charged.) A complete charge of a fully discharged battery 
can take up to four hours using external power and up to 10 hours using the interface cable.

Charge within the recommended temperature of 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) 
ideal.

For information on maximizing battery life, see 

.

The device has on screen charging indicators as well as an LED. The device’s flashing green LED indicates 
charging activity.

If the device displays 

 or 

 indicating a charging problem, remove the device from the cradle and replace 

the battery. If one of these icons continues to display, contact Motorola Solutions Support. See 

 for descriptions of display icons.

When inserting the device in a wall mounted cradle, ensure the device’s hook recesses engage the hooks 
on the wall mount adapter (when applicable).

The default state of the LED is off when the battery is fully charged with the exception of several initial 
charge cycles. The LED may continually blink until the battery goes through several discharge cycles to 
calibrate itself.