Motorola CPCI-6020 用户手册

Field Service Menu Enable [Y/N] = N?

Probe System for Supported I/O Controllers [Y/N] = Y?

Auto-Initialize of NVRAM Header Enable [Y/N] = Y?

Network PReP-Boot Mode Enable [Y/N] = N?

SCSI Bus Reset on Debugger Startup [Y/N] = N?

Primary SCSI Bus Negotiations Type [A/S/N] = A?

Primary SCSI Data Bus Width [W/N] = N?

Secondary SCSI Identifier = "07"?

Y

Display the field service menu.

N

Do not display the field service menu. (Default)

Y

Accesses will be made to the appropriate system busses (e.g., VMEbus, local MPU 
Bus) to determine the presence of supported controllers. (Default)

N

Accesses will not be made to the VMEbus to determine the presence of supported 
controllers.

Y

NVRAM (Prep partition) header space is initialized automatically during board 
initialization, but only if the PReP partition fails a sanity check. (Default)

N

NVRAM header space will not be initialized automatically during board initialization.

Y

Enable PReP-style network booting (same boot image from a network interface as from 
a mass storage device.)

N

Do not enable PReP-style network booting. (Default)

Y

SCSI Bus is reset on debugger setup.

N

SCSI Bus is not reset on debugger setup (Default)

Y

Asynchronous SCSI Bus negotiation. (Default)

S

Synchronous SCSI Bus negotiation.

N

None

W

Wide SCSI (16-bit bus)

N

Narrow SCSI (8-bit bus). (Default)