Motorola MVME6100 用户手册
1-14
Computer Group Literature Center Web Site
Board Description and Memory Maps
1
TSTAT_MASK
Thermostat Mask. This bit is used to mask the DS1621 temperature
sensor thermostat output. If this bit is cleared, the thermostat output
will be enabled to generate an interrupt on GPP3. If the bit is set, the
thermostat output is disabled from generating an interrupt.
sensor thermostat output. If this bit is cleared, the thermostat output
will be enabled to generate an interrupt on GPP3. If the bit is set, the
thermostat output is disabled from generating an interrupt.
FBOOTB_WP
Software Flash Bank B Boot Block Write Protect. This bit is to provide
software-controlled protection against inadvertent writes to the Flash
Bank B Top 1 MB (0xFFF00000) space. Clearing this bit and disabling
HW write-protect will enable writes to the Bank B Flash Top 1MB
boot block devices. This bit is set during reset and must be reset by the
system software to enable writing of the Flash Bank B boot block.
software-controlled protection against inadvertent writes to the Flash
Bank B Top 1 MB (0xFFF00000) space. Clearing this bit and disabling
HW write-protect will enable writes to the Bank B Flash Top 1MB
boot block devices. This bit is set during reset and must be reset by the
system software to enable writing of the Flash Bank B boot block.
FBA_WP_HDR
Hardware Flash Bank A write protect header status. Read ONLY.
Hardware jumper configuration can not be overridden by the software
control bit 6 in this register.
Hardware jumper configuration can not be overridden by the software
control bit 6 in this register.
FBOOTB_WP_HDR
Hardware Flash Bank B Boot Block write protect header status. Read
ONLY. Hardware jumper configuration can not be overridden by the
software control bit 3 in this register.
ONLY. Hardware jumper configuration can not be overridden by the
software control bit 3 in this register.