Motorola MVME177 用户手册
![Motorola](https://files.manualsbrain.com/attachments/83de88ba2280e7232128e8931d7cbd2a38dcc654/common/fit/150/50/0293f422c4d32e7e0f777d5e11bc33c83ea5627f71ddf155374c02a23d9a/brand_logo.png)
The computer programs stored in the Read Only Memory of this device contain
material copyrighted by Motorola Inc., Þrst published 1990, and may be used only
under a license such as the License for Computer Programs (Article 14) contained
in Motorola's Terms and Conditions of Sale, Rev. 1/79.
material copyrighted by Motorola Inc., Þrst published 1990, and may be used only
under a license such as the License for Computer Programs (Article 14) contained
in Motorola's Terms and Conditions of Sale, Rev. 1/79.
All Motorola PWBs (printed wiring boards) are manufactured by UL-recognized
manufacturers, with a ßammability rating of 94V-0.
manufacturers, with a ßammability rating of 94V-0.
!
WARNING
This equipment generates, uses, and can radiate
electromagnetic energy. It may cause or be susceptible to
electromagnetic interference (EMI) if not installed and used in
a cabinet with adequate EMI protection.
electromagnetic energy. It may cause or be susceptible to
electromagnetic interference (EMI) if not installed and used in
a cabinet with adequate EMI protection.
Motorola
¨
and the Motorola symbol are registered trademarks of Motorola, Inc.
All other products mentioned in this document are trademarks or registered
trademarks of their respective holders.
trademarks of their respective holders.
© Copyright Motorola, Inc. 1995, 1996
All Rights Reserved
Printed in the United States of America
June 1996
European Notice: Board products with the CE marking comply with the
EMC Directive (89/336/EEC). Compliance with this directive implies
conformity to the following European Norms:
EMC Directive (89/336/EEC). Compliance with this directive implies
conformity to the following European Norms:
EN55022 (CISPR 22) Radio Frequency Interference
EN50082-1 (IEC801-2, IEC801-3, IEEC801-4) Electromagnetic
Immunity
Immunity
The product also fulÞlls EN60950 (product safety) which is essentially the
requirement for the Low Voltage Directive (73/23/EEC).
requirement for the Low Voltage Directive (73/23/EEC).
This board product was tested in a representative system to show
compliance with the above mentioned requirements. A proper installation
in a CE-marked system will maintain the required EMC/safety
performance.
compliance with the above mentioned requirements. A proper installation
in a CE-marked system will maintain the required EMC/safety
performance.