Panasonic CF-T4 用户手册
41
Troubleshooting
1
Turn off the computer and connect the DVD-ROM & CD-R/
RW drive to the computer, then connect the AC adaptor.
RW drive to the computer, then connect the AC adaptor.
Do not interrupt the reinstallation procedure before completion, for example
by turning off the computer or pressing the Ctrl + Alt + Del key, as this
may prevent Windows from starting up, or may cause data to be lost so that
the reinstallation procedure cannot be executed.
by turning off the computer or pressing the Ctrl + Alt + Del key, as this
may prevent Windows from starting up, or may cause data to be lost so that
the reinstallation procedure cannot be executed.
2
Change the settings in the Setup Utility.
Make the following settings.
z
z
Return settings to the status at the time of purchase.
z
Change settings to enable startup from DVD-ROM & CD-R/RW drive.
If you change the settings from that at the time of purchase, we recommend
that you make a note of the settings that are changed.
A
that you make a note of the settings that are changed.
A
Turn on the computer, and press the F2 key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
z
screen is displayed.
The Setup Utility will start up.
z
If the password has been set, enter the Supervisor Password, and
press the Enter key.
press the Enter key.
B
Press the F9 key.
At the confirmation message, select [Yes] and press the Enter key.
At the confirmation message, select [Yes] and press the Enter key.
C
Select the [Boot] menu, then select [USB CDD] and press the F6 key until
[USB CDD] is at the top of [Boot priority order].
[USB CDD] is at the top of [Boot priority order].
D
Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
drive.
E
Press the F10 key.
At the confirmation message, select [Yes] and press the Enter key.
The Setup Utility will close, and the computer will restart.
z
At the confirmation message, select [Yes] and press the Enter key.
The Setup Utility will close, and the computer will restart.
z
If the password has been set, enter the Supervisor Password, and
press the Enter key.
press the Enter key.
3
Use the Product Recovery DVD-ROM to execute reinstalla-
tion.
tion.
A
Press the 1 key to execute [1. [Recovery]].
(All of the screens below are only examples.)
(All of the screens below are only examples.)
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled. If [Recovery] or
[Erase HDD] is executed, the Backup function will be disabled, and your
Backup data will be lost.] appears, press the Y key.
B
When the message [The Backup function has been enabled. If [Recovery] or
[Erase HDD] is executed, the Backup function will be disabled, and your
Backup data will be lost.] appears, press the Y key.
B
If you agree, press the 1 key.
If you do not agree, press the 2 key.
z
If you do not agree, press the 2 key.
z
If you press the 1 key the menu will be displayed.
Reinstalling