Panasonic CF-T4 用户手册

47

z

Regarding backup area
• Requires availability of at least half of the entire hard disk.  Without sufficient 

space available, the backup area cannot be created.

• When the backup area is created, the usable hard disk capacity will be 

reduced to less than half.

• The backup area cannot be accessed from Windows.  For this reason, backed 

up data cannot be copied to CD-R or other removable disk media.

• When the hard disk backup function is executed, data in the backup area will 

be overwritten. If newly created or edited data is backed up later, data stored 
previously in the backup area will be lost.

A

Turn off the computer and connect the DVD-ROM & CD-R/RW drive to 
the computer.

B

Turn the computer on, and press the F2 key while [Panasonic] boot 
screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password.
You cannot register [Boot] menu with a User Password.

C

Select the [Boot] menu, then select [USB CDD] and press the F6 key until 
[USB CDD] is at the top of [Boot priority order].

D

Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW 
drive, then press the F10 key.
At the confirmation message, select [Yes] and press the Enter key.
The computer will restart. If [Enter Password] is displayed during the fol-
lowing procedures, input the Supervisor Password or the User Password.
This screen should appear.

E

Press the 3 key to execute [3. [Backup]].

z

When dividing the hard disk into partitions 
Do not execute [1. [Recovery]] to divide the hard disk into partitions.  The hard 
disk backup function cannot be enabled after the hard disk has been partitioned.  
Use step G to divide the hard disk.

F

At the confirmation message, press the Y key.

G

Select how to divide the hard disk from the menu.
<To create a backup area and enable the backup function without dividing 
the hard disk>
Select [1].