Fujitsu Siemens Computers A6120 产品宣传页

The Lithium ion battery is not charged upon purchase. 
Initially you will need to connect either the AC adapter 
or the Auto/Airline adapter to use your notebook.

Be careful when you select the language. 
The only way to change the language 
is to do a recovery process.

It takes approximately 4 hours to 
charge a fully discharged single 
battery with unit off or in 
suspend mode.

Optimizing Battery Life
• Set power management setting 

to Maximize Battery Life.

• Adjust display brightness levels 

to lowest comfortable setting.

• Remove PC Cards and Express-

Cards when not needed.

• Utilize Suspend mode when 

not using your notebook.

• Read the Power Management 

section in your electronic User’s 
Guide for additional features.

Adjusting Display Brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness

Adjusting Volume
• Fn + F8 to decrease volume
• Fn + F9 to increase volume

* Mono microphone jack or stereo 

microphone/line in jack depending 
on confi guration.

* *  Stereo headphone/Optical Digital 

Audio out jack or stereo head-
phone/Line Out/Optical Digital 
Audio out jack.

Before you activate TPM, be sure 
you fully understand how it works 
by following the directions included 
on the TPM applications CD. If you 
choose to enable TPM, your TPM 
password will be critical to the 
operation of your computer and 
MUST be remembered.

Look for the latest drivers on the 
Drivers and Applications Restore 
CD. Right-click the FDU icon and 
select “update”, or download 
them at us.fujitsu.com/computers.

   Ensure that your LifeBook is on a hard level surface and that 

• 

the air vents are not blocked.

   Lift the display, being careful not to touch the screen. 

• 

  Adjust the display until it is at a comfortable viewing angle.

• 

  Plug the AC adapter into your notebook.

• 

  Plug the power cord into the AC adapter.

• 

  Connect the power cord to an electrical outlet.

• 

   Connect either a phone cord to the modem jack or an Ethernet 

• 

cable to the LAN jack on your notebook and to a wall jack 
or to an Ethernet router.

Important: 

   During the setup procedure, do not disconnect the power supply, 

• 

press any buttons, or use any peripheral devices such as a 
remote control.

 

•   You should not attach any external devices and do not put a DVD/CD in 

your drive until you have gone through the initial power on sequence.

    Press the Suspend/Resume/Power button (above the keyboard) to 

• 

turn on the notebook. When you do this for the fi rst time, it will display 
a Fujitsu logo on the screen. If you do nothing the system will load 
the operating system, and then the Windows Welcome will begin.

   Check to be sure the WLAN switch is on.

• 

 For Genuine Microsoft

 XP: The fi rst time you boot up 

your system, you will see an icon called Click Me! in the Start menu. 
 For Genuine Windows Vista®: In addition to an icon on the 
desktop, a dialog box will automatically open that prompts you 
to run Click Me!. If you choose not run ClickMe! at this time, 
the ClickMe! icon will appear on your desktop.

   When you click the Click Me! icon, your system will automatically 

• 

build the icon tray in the bottom right of the screen. These icons 
provide links to utilities that you will frequently access.

   After the operating system has initialized, enter the information 

• 

as prompted to personalize your notebook and confi gure your 
modem to dial.

   Accept the Microsoft

• 

®

 Windows

®

 Licensing Agreement and the 

Fujitsu End User License Agreement to proceed.

  Select your User ID and Password during the “Welcome Screen.” 

• 

 

•  Keep a record of your User ID and password stored in a secure place.

 

•  THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.

  Do not attempt to turn power on or off during this stage. 

• 

   Register your notebook with Fujitsu Service and Support via our 

• 

website at us.fujitsu.com/computers.

   You will need to be set up with an Internet Service Provider (ISP) 

• 

to register online. 

❏  LifeBook notebook 

❏  International Limited Warranty 

❏  Genuine Windows Vista® recovery

❏  Lithium ion battery, pre-installed 

 

and Registration booklet 

 

and utility disc

❏  AC adapter with power cord and core 

❏  Microsoft® associated product materials  ❏  Genuine Windows® XP Professional 

❏  Phone/modem (RJ-11) telephone cable 

❏  Microsoft® application CDs 

 

recovery disc (For Genuine Windows

❏  Drivers and Applications Restore (DAR) disc 

❏  End User License Agreement 

 

Vista® Business Operating System)

❏  User’s Guide

❏  CyberLink PowerDirector disc  

❏  ExpressCard Hybrid (Digital/Analog) TV Tuner

❏  CyberLink MakeDVD disc (Only with Genuine     

(For Genuine Windows Vista® Home Premium

 

Windows Vista® Home Premium) 

 

operating system only)

❏  Additional Lithium ion battery
❏  Webcam Software disc
❏  Remote Control, Remote Control manual, 
 

batteries, and USB IR receiver

 

(for Genuine Windows Vista® Home

 

Premium operating system only)

   Close any open programs, applications or utilities Insert software 

• 

application disc into media drive.

   Open the application folder, select the set-up icon, and load 

• 

desired software, as shown in the table.

   Restart your computer.

• 

   Please see the TV Tuner User’s Guide for detailed instructions.

• 

   To take advantage of all the features of your new Fujitsu LifeBook 

• 

notebook, it is highly recommended that you read your electronic 
User’s Guide. It contains important detailed information about 
your new computer. You can access your User’s Guide 
by selecting its icon from the screen desktop.

   If you are using Genuine Windows Vista®, Click [Allow] 

• 

in the User Account Control (UAC) box.

  Click [Continue]

• 

•  Select “I Agree” and click [Continue] in the License Agreement box.

   Select “User’s Guide” from the “Utilities/Applications” category.

• 

   Click [Install Selected Subsystems]

• 

   The User’s Guide will be copied to your hard drive in the 

• 

C:\Fujitsu\Manual directory. Shortcuts to the Users Guide 
will be placed on your desktop and in the Start menu.

   If the need arises, you can safely recover back to the factory image 

• 

by following a straight-forward procedure in your User’s Guide.

If you have a: 

Webcam  

Arcsoft WebCam 

 Companion

Dual-Layer Multi-Format  

CyberLink PowerDirector

DVD Writer

Power Indicator
The Power indicator glows blue when 
your system is turned on. 

Battery Charge/DC-In Indicator
Orange, solid: AC adapter and battery 
are available and system is charging.

Green, solid: AC adapter and battery 
are available and system is fully 
charged, or AC adapter is plugged 
in but battery is not installed.

Orange, blinking: AC adapter and battery 
are available and waiting to charge battery 
(battery is out of thermal range).

Off: AC adapter is not plugged in. 

Battery Level Indicator
If the battery is installed while the power 
is off, the battery level indicator will 
display the charge levels for fi ve 
seconds after it blinks orange. 

If the AC adapter is not connected or the 
battery pack is not fully charged when 
the computer is switched to stand 
by mode, the indicator will blink. 

Batteries subjected to shocks, vibrations 
or extreme temperature can be 
permanently damaged.

A shorted battery is damaged and 
MUST be replaced.

Hard Drive/Optical Drive 
Access Indicator
The Hard Drive/Optical Drive Access 
indicator glows green when your 
internal hard drive is being accessed. 
Note that fl ickering is normal. 

NumLk Indicator
The NumLk indicator states that the 
integral keyboard is set in ten-key 
numeric keypad mode. 

CapsLock Indicator
The CapsLock indicator states that your 
keyboard is set to type in all capital letters. 

ScrLk Indicator
The ScrLk indicator states that your scroll 
lock is active. 

The Status Indicators represent specifi c components of 
your Fujitsu LifeBook notebook. The LEDs below each 
symbol tell you how each of those components 
are operating.