Sony PCG505FX 手册

VAIO 505 SuperSlim Notebook User Guide

80

1

Remove the floppy disk drive, port replicator, PC card, and any 
other peripheral devices. from the computer.

2

Turn the computer off and then turn it on again.

3

Turn on the computer and press the F2 key when the Sony logo 
appears. The BIOS setup menu screen appears.

4

Press the arrow keys to select the Exit menu.

5

Press the arrow keys to select Get Default Values and then press the 
Enter key. The message “Load default configuration now?” 
appears.

6

Check that [Yes] is selected, then press the Enter key.

7

Press the arrow keys to select Exit (Save Changes) and then press 
the Enter key. The message “Save configuration changes and exit 
now?” appears.

8

Check that [Yes] is selected, then press the Enter key. The computer 
restarts.

If your computer still displays the message “Operating system not 
found” and Windows does not start, contact Sony Online Support (SOS).

My LCD does not display anything
❑

Check that the computer is plugged into a power source and that it is 
turned on. Check that the power indicator on the front panel of the 
computer is on.

❑

Check that the battery pack is inserted properly and that it is charged.

❑

The computer may be in LCD (Video) Standby mode. Press any key 
to activate the display.

❑

The video output may be directed to an external display attached to 
the port replicator. Press Fn+F7 until video output appears on the 
LCD.

The screen image on my external display is not centered or sized properly

Use the controls on your external display to adjust the image. See the 
manual supplied with your display for more information.