Asrock K7VT6-C 用户手册

1 5

2.6

Connectors

Connectors are NOT jumpers. DO NOT place jumper caps over these

connectors. Placing jumper caps over the connectors will cause perma-

nent damage of the motherboard!

FDD Connector

(33-pin FLOPPY1)

(see p.7 item 16)

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

Primary IDE Connector (Blue)

Secondary IDE Connector (Black)

(39-pin IDE1, see p.7 item 8)

(39-pin IDE2, see p.7 item 7)

80-conductor, ATA 66/100/133 cable

Note: If you use only one IDE device on this motherboard, please set the IDE

device as “Master”. Please refer to the instruction of your IDE device vendor

for the details. Besides, to optimize compatibility and performance, please

connect your hard disk drive to the primary IDE connector (IDE1, blue) and

CD-ROM to the secondary IDE connector (IDE2, black).

Shared USB 2.0 Header

This USB45 connector is shared

(9-pin JUSB45)

with the USB 2.0 ports 4,5 on

(see p.7 item 25)

ASRock I/O Plus

. When using

the front panel USB ports by

attaching the front panel USB

cable to this connector

(JUSB45), the USB ports 4,5 on

ASRock I/O Plus

will not be able

to function.

Internal Audio Connectors

These connectors allow you to

(4-pin CD1, 4-pin AUX1)

receive stereo audio input from

(CD1: see p.7 item 17)

sound sources such as a CD-

(AUX1: see p.7 item 18)

ROM, DVD-ROM, TV tuner card,

or MPEG card.

CD-R

GND

CD-L

AUX-R

GND

AUX-L

CD1

AUX1

USB_PWR

P-4

GND

DUMMY

USB_PWR

P+4

GND

P-5
P+5

connect the blue end

to the motherboard

FLOPPY1

Pin1

IDE1

PIN1

IDE2

PIN1

connect the black end

to the IDE devices

the red-striped side to Pin1