ABC Office 390 Series 用户手册

DAHLE Shredder Oil is the only lubricant you should use in your paper shredder.
It has been specially formulated so as not to leave any residue that could attract
dust and clog the shredding mechanism. You can order DAHLE Shredder Oil
(item # 740) from your local dealer.
Repairs on your paper shredder should only be performed by qualified
technicians. If you need service, contact your local dealer

or you can contact

DAHLE North America Customer Service between 8:30 am and 5:00 pm EST at
(800) 995-1379.

BEFORE YOU CALL FOR SERVICE

SYMPTOM POSSIBLE

CAUSES

SOLUTION

No Power

1. Power button not pressed Press button (green light

turns on)

2. Unit unplugged

Connect to outlet

3. Outlet dead

Reset circuit breaker

4. Door not fully closed

Close Door

5. Shred Bag full

Change Shred Bag

Low capacity

1. Cutting blades

dry

Lubricate cutting blades
according to instructions.

SAFETY INSTRUCTIONS

•

Read the operating instructions carefully proir to starting up the unit!

•

Do not use in the vicinity of inflammable liquids or gases.

•

Do not use in the vicinity of corrosion materials.

•

Do not expose to the wet.

•

Do not let children operate this office equipment.

•

Do not reach into the cutting mechanism during operation - not even from

the top or with objects.

•

Do not use the shredder over a period of more than 5 minutes in no-load

operation (operation without paper).

•

Keep long hair clear of machine.

•

Keep neck-ties clear of machine.

•

Keep bracelets clear of machine.

•

Power supply must be accessible all the times.

•

Disconnect power supply before servicing.

•

The safety devices must not be manipulated with or removed.

•

Please make sure that the shredder gets sufficient ventilation (ventilating

flaps must kept free).

BEFORE YOU SHRED

•

Remove Transport Bolts with wrench provided.

•

Record the Model and Serial Number in the space provided inside the front

cover.

•

Be sure the electrical outlet provides the proper power for your shredder

(see rating label on rear of shredder).

•

Install Shred Bag (see: “CHANGING THE SHRED BAG”).

TURNING ON YOUR SHREDDER

1. ON, OFF are controlled by the green push button (8)

found on top of the shredder.

2. Press this button turns the shredder on

And places it in the stand-by mode.

3. Pressing the button again turns the
shredder

off.

NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED

ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME

abcoffice