Avaya G350 用户手册
Installing the Avaya G350 Media Gateway
Step 1: Mount the G350 chassis
Installation of the G350 Media Gateway
19
December 2003
2
Installing the Avaya G350 Media
Gateway
This chapter describes the physical installation. Perform the following steps in order:
1
2
3
4
The steps are described in the sections below.
When you have installed the chassis and media modules and connected the power, you can move on to
, and connect external devices to the G350.
Step 1: Mount the G350 chassis
Mount the G350 in one of the following scenarios:
•
In a rack
•
On a wall
•
On a table
CAUTION:
When handling any components of an S8300 Media Server or G350 Media Gateway, wear
an anti-static wrist ground strap. Connect the strap to an approved ground such as an
unpainted metal surface.
an anti-static wrist ground strap. Connect the strap to an approved ground such as an
unpainted metal surface.
Mounting the G350 in a rack
The G350 mounts in a standard 19-inch rack.
If the G350 is to be mounted in a rack, you can fasten the G350 to the rack either at the front of the G350
or at the middle. In either case, mounting brackets must be attached to the G350.
or at the middle. In either case, mounting brackets must be attached to the G350.
There are two types of mounting brackets provided with the G350:
•
Without cable guides - two mounting brackets without cable guides are provided.
•
With cable guides - one mounting bracket with cable guides is provided. This bracket provides
guides for electrical cables.
guides for electrical cables.
Mounting brackets without cable guides can be attached either to each side of the front of the G350 for
fastening the unit to the rack at the front or to the middle of each side panel of the G350 for fastening the
chassis to the rack at the middle.
fastening the unit to the rack at the front or to the middle of each side panel of the G350 for fastening the
chassis to the rack at the middle.