Apple DPR2320TM 用户手册

 

 

This section describes the section headings and fields descriptions of the Setup 
Wireless – Basic page. 

 If you make changes in the Setup Wireless – Basic page, click Apply to 

apply and save your wireless basic settings. 

 

Service Set Identifier 
(SSID) 

The name assigned to this access point 

 The factory default for the SSID field should 

contain the product name WebSTAR. 

Basic Service Set 
Identifier (BSSID) 

The MAC address of the access point 

Country 

Allows you to select the country in which you are using 
your access point 

New Channel (1-11) 

Allows setting a communications channel for your 
access point 

 Wireless networking channels overlap. Channels 

1, 6, and 11 do not overlap with each other. For best 
performance, select one of these channels. If there are 
other access points in use in the area, select one of 
these channels that is farthest away from the other 
access points. 

Example: If channel 8 is in use by another access point, 
use channel 1 for your wireless network. 

 If your wireless network is not operating correctly, 

or if external devices are interfering with your signal, 
select a different channel. Use your PC wireless utility 
software to scan for other access points in your area. 

Current Channel 

Present channel the WAP is using 

Encryption Mode 

Shows current encryption mode 

Firmware Version 

Shows current firmware version 

Access Point 

This setting allows you to turn the access point on the 
gateway on or off